Share this page

Error xxxx-3080-xxxx-xxxx-xxxx-xxxx occurs when you try to update your Xbox 360

You see the following error code and message when you try to download an Xbox Dashboard update to your Xbox 360 console:

System update not downloadable.
Status code: xxxx-3080-xxxx-xxxx-xxxx-xxxx

Note The “xxxx” digits in the sequence vary.

This may mean that your console can't find a previous version of the update.

Solutions

To resolve this problem, try the following solutions.

Solution 1: Download the update to an external USB flash drive

To resolve this issue, download the update to an external USB flash drive. Then, install the update from the flash drive. Here's how:

  1. Obtain a USB flash drive with at least 90 megabytes (MB) of free space.
  2. Plug the USB flash drive into a USB port on your computer.
    Note The USB flash drive must use the FAT32 file system (Windows).
  3. Download this system update for your error code:
    xxxx-3080-xxxx-xxxx-xxxx-xxxx
  4. Click Save to save the console update .zip file on your computer.
  5. Unzip the file. If you are using Windows XP, Windows Vista or Windows 7, double-click the .zip file to unzip it.
  6. Copy the contents of the .zip file to the root directory of your USB flash drive.
  7. Unplug the USB flash drive from your computer.
  8. If there is a disc in the console, remove it.
  9. Turn off the console.
  10. Remove all console storage devices, including any USB flash drives, external hard drives or the internal hard drive on the Xbox 360 E console or Xbox 360 S console.
    • Remove the hard drive from an Xbox 360 E console:
      1. Turn off the console.
      2. Position the console horizontally.
      3. On the right side of the console, locate the hard drive cover release near the back of the console.
      4. Slide the release diagonally (down and toward the front of the console) while pulling the hard drive door open.
      1. Pull the tab to remove the hard drive.
  1. Replace the hard disk drive cover before turning the console back on.
  • Remove the hard drive from an Xbox 360 S console:
    1. Turn off the console.
    2. Position the console horizontally.
    3. On the right-hand side of the console, locate the hard drive cover release (near the back of the console).
    4. Slide the release towards the front of the console while pulling the hard drive door open.
  1. Pull the tab to remove the hard drive.
  1. Replace the hard drive cover before turning the console back on.
  • Remove the hard drive from an original Xbox 360 console:
    1. Turn off the console.
    2. Locate the hard drive on the top of the console (or on the left side, depending on how the console is oriented).
      Note Not all Xbox 360 consoles include a hard drive.
  1. Press the release button on the hard drive.
      1. Lift the hard drive away from the console.
  1. Plug the USB flash drive that contains the update into a USB port on the console.
  2. Turn on the console. When the console starts, the software update process should automatically start.

Solution 2: Simplify your network setup

Sometimes the firewall on a router blocks the update from downloading. If your router has such a firewall, you have to temporarily simplify your network setup. Here’s how.

  1. Turn off your console.
  2. Unplug the modem from your router. Using a standard Ethernet cable, connect your console directly to your modem. This will enable the update to bypass your router's firewall. (There should be no other devices plugged in to your modem.)
  3. Turn on your console.
  4. Download the system update that you were trying to download.
  5. Disconnect your console from your modem. Re-connect your modem to your router and then your console to your router.

Solution 3: Request a repair

If the solutions above didn't resolve the problem, your console needs to be repaired. See Getting your Xbox console or Kinect sensor serviced.

Was this article helpful?

Yes
No

Thank you for your feedback

Thanks for your feedback!

We're sorry this article didn't solve your problem. We won't give up and neither should you. Try this community option, below.
Get help from the community
Ambassador chat image
Ambassador chat
Chat one on one with a fellow Xbox User who wants to help.

Provide feedback for this topic

255 characters remain.
To protect your privacy, please do not include contact information in your feedback.
Get help from the community
Ambassador chat image
Ambassador chat
Chat one on one with a fellow Xbox User who wants to help.

Contact Us

Would you like to contact Support regarding the "Error xxxx-3080-xxxx-xxxx-xxxx-xxxx occurs when you try to update your Xbox 360" issue you were reading about or a different issue?

Share this page