By using this site you agree to the use of cookies for analytics, personalized content and ads.

Set up your Xbox 360 E console

Overview

Setting up your Xbox 360 E console is easy – just follow these step-by-step instructions.

Solutions

Unbox and position the console

Step 1: Unbox the console

picture

An Xbox 360 E game system typically includes:

  1. Console
  2. A/V cable (3.5mm composite)
  3. Power supply
  4. Power cord
  5. Wireless controller
  6. 2 AA batteries
  7. User manual
  8. Wired headset (varies by console package)

Step 2: Remove the protective tape

picture

Step 3: Position the console

Good placement Poor placement
picture picture

Make sure that the location for your console is as follows:

  • Stable.
  • Well-ventilated, relatively cool and away from direct heat sources
  • Uncluttered. Do not put other objects on, under or right next to the console

You can position the console vertically or horizontally.

Plug in the power supply

  1. Plug in the power supply.
  2. Plug the power cord into the power supply.
  3. Plug the power cable into an electrical socket.

Connect the console to your TV

The Xbox 360 E console system includes a Composite Audio/Visual cable. You can use this cable to connect the console to a standard television or monitor. Here's how:

Notes

  • This Composite Audio/Visual cable does not support high definition (HD) display.
  • If you have an HDTV and want to check the instructions for using an HDMI cable, see Connect your Xbox 360 console to a TV.
  1. Connect the small 3.5mm connector to the 3.5mm jack on the back of the console.
  2. Locate the A/V ports on your TV or monitor. Connect the colour-coded connectors on the composite A/V cable to the corresponding ports on the TV as follows:
    • Yellow = composite video
    • Red = right-channel analogue audio
    • White = left-channel analogue audio
picture

Note Monaural (mono) TVs have only one audio port. Connect either the red or white connector to the TV.

  1. Turn on the TV and console.

    When you turn on the TV and console, you should see the Xbox Dashboard on your display:

picture

If you don't see the Xbox Dashboard, you might need to change the video input setting. To change the video input setting, refer to your TV or Entertainment Centre manual for instructions.

To improve the video display, you can change the default settings.

Connect a controller

Connect a wireless controller

  1. Turn on the console.
  2. Insert the AA batteries into the controller.
  3. Turn on your controller by pressing and holding the centre Xbox Guide button, until the controller turns on.
picture

If the controller does not turn on, check the batteries. If you’re using a rechargeable controller, make sure that it is charged.

  1. Press and release the connect button on the console.
picture
  1. Within 20 seconds, press and release the connect button on the controller.
picture

Notes

  • When the lights surrounding the power button on the console stop flashing, the controller is connected.
  • You can connect up to four controllers to a console.
  • Each connected controller is assigned to one of four positions. Each position corresponds to a lighted section around the controller’s Xbox Guide button.
picture

Connect a wired controller

If you have a wired controller, see Connect a game controller.

Set your console settings

picture

The first time that you start your console, you’re prompted to:

  • Select your language.
  • Create a profile.
  • Set up a network connection (optional). For information about how to connect to Xbox Live, see Wired connection or Wireless connection.

Follow the on-screen instructions to complete these steps.

picture

Now, insert a game disc and you’re ready to start playing!

Tip Watch Xbox 101 videos to learn how to get the most out of your Xbox 360 console.

Was this article helpful?

Yes
No

Thank you for your feedback

Thanks for your feedback!

We're sorry this article didn't solve your problem. We won't give up and neither should you. Try this community option, below.
Get help from the community
Ambassador chat image
Ambassador chat
Chat one on one with a fellow Xbox User who wants to help.

Provide feedback for this topic

255 characters remain.
To protect your privacy, please do not include contact information in your feedback.
Get help from the community
Ambassador chat image
Ambassador chat
Chat one on one with a fellow Xbox User who wants to help.

Contact Us

Would you like to contact Support regarding the "Set up your Xbox 360 E console" issue you were reading about or a different issue?