If you see “Double NAT detected” in your network settings, try these steps to change or remove it.
If you aren’t sure whether the device in your home network is a modem or a gateway, there are a few clues to look for:
If you’re using both a router and a gateway, you’ll need to remove one of them from the network. To remove one of these, you can use one of the following methods.
Change how your gateway or router is set up
First, try putting your gateway into bridge mode. Each manufacturer handles bridge mode differently, so you’ll need to check with your manufacturer or service provider to find out how to do this.
If you can’t put your gateway into bridge mode, try changing your router to function only as an access point. This will remove it as a NAT on your network.
Once you’ve changed either your gateway or your router settings, restart your Xbox and your network devices, and then check your network settings again to make sure that the NAT message is gone.
To check your network settings:
If “Double NAT detected” does not appear, the issue has been resolved. If it’s still there, try the following solution.
Connect your Xbox One directly to the gateway
Try connecting your Xbox directly to your gateway through Wi-Fi, a wired connection, or an alternate connection like Powerline or MoCA adapters.
After you’ve connected your Xbox directly to your gateway, check your network settings to make sure that the NAT message is gone.
If you’re still seeing the NAT message, contact your service provider for more help.
Connect your Xbox One directly to the modem
Try connecting your Xbox directly to the modem and then restarting both the Xbox and the modem. Check your network settings to make sure the NAT message is gone. If you’re still seeing the NAT message, contact your service provider for more help.
If your network only uses a gateway, you’ll need to contact your service provider for more help.
For more info on how to change settings on your network hardware, visit our Networking Hardware Information forums.
Thanks for your feedback!
Provide feedback for this topic
Would you like to contact Support regarding the "Double NAT detected in your network settings" issue you were reading about or a different issue?