Error C0051207 occurs when you use the Xbox 360 Kinect Sensor

You see the following error code and message when you try to use the Xbox 360 Kinect Sensor:

Connect a valid sensor to your console
C0051207

This may mean that your Kinect sensor is not connected correctly.

To resolve this problem, try the following solutions.

Solution 1: Make sure the Kinect sensor is plugged in correctly and try again

• Xbox 360 E console

1. Turn off the console.
2. Unplug the sensor from the console, and then plug the sensor cable into the AUX port on the back of the console.

   Important Remove the power/USB adapter cable if your Kinect sensor came with one.

3. Turn on the console.

• Xbox 360 S console

1. Turn off the console.
2. Unplug the sensor from the console, and then plug the sensor cable into the AUX port on the back of the console.

   Important Remove the power/USB adapter cable if your Kinect sensor came with one.

3. Turn on the console.

• Original Xbox 360 console

1. Turn off the console.
2. Make sure the power cord is plugged into a working electrical outlet.
3. Make sure the USB connector is plugged into the back of the console.
4. The light located near the middle of the split cable should be green.

   Note If you do not see a green light, try plugging the cable into another outlet to make sure the cable is working properly.

5. Turn on the console.

Solution 2: Replace the cable
If you still don't see a green light after plugging the cable into another outlet, your cable needs to be replaced. You can order a replacement cable from Device Support (sign in with your Microsoft account and then select Replace an accessory). Console registration may be required.

If this solution doesn't resolve the problem, go to Device Support and select Repair my device to request a repair.

Repair or warranty questions? See Xbox warranty and registration FAQ.