Set up live TV with your Xbox One X, Xbox One S, or original Xbox One console
This page describes the requirements for using OneGuide on Xbox One X, Xbox One S, or the original Xbox One, so you can access TV service from your console. It also describes how to configure your Xbox One X, Xbox One S, or original Xbox One console to control your TV, audio receiver, and set-top box.
The first time you launch the TV app, the console will walk you through the steps described below. If you want to set up live TV later, you can download the OneGuide app and start setup from there. Or, if you want to change any of your hardware settings after initial setup, you can do so by selecting TV & OneGuide from System > Settings.
Note Channel information in OneGuide is not available in all regions. You can still use HDMI pass-through to view TV content through Xbox One, but OneGuide will not show your TV listings. For a list of Xbox One features and the regions where they're available, see Xbox One Feature Availability.
On this page
To use OneGuide with your TV and Xbox One, you need the following:
- A cable or satellite set-top box with HDMI output, or an Xbox One USB TV Tuner.
- A connection to Xbox Live to download channel lineup information for OneGuide.
- A Kinect sensor or an IR emitter cable.
Connecting your console to your home theater
Before setting up OneGuide, confirm that your console is correctly connected to your home theater system and is ready for live TV.
For more information, see How to connect your Xbox One to your home theater system for live TV.
Setting up TV for the first time
- Download the OneGuide app. You'll be asked a series of questions in order to complete your TV setup.
- On the Watch TV on your Xbox screen, select either Set up your cable or satellite box or Set up your USB TV tuner. This depends on the source of your TV signal.
- The Let’s watch TV screen will try to detect an HDMI-in signal. If the source of your HDMI signal shows up on the picture of the TV screen, select Next to continue and skip to step 5. If the source of your HDMI signal doesn’t appear, go on to step 4.
- If you don’t see the source of your HDMI signal displayed on the picture of the TV screen, you’ll have to verify that your console is receiving a signal from your set-top box:
- Confirm that your set-top box is connected by HDMI cable to the HDMI port on your console.
- If, after a few seconds, you don't get live TV on your Xbox screen, see You see a black screen or experience poor video quality when watching TV with Xbox One.
- Once live TV appears, select Next.
- On the Let’s set up OneGuide screen, select Next to begin the setup of your cable or satellite TV provider’s channel guide. Follow the steps below to help your console learn how to control your cable or satellite set-top box.
- Enter your postal code and select Next to find TV providers in your area.
- From the dropdown menu, select your cable or satellite TV provider.
Note If your provider doesn't appear in the list, or if you watch broadcast TV only, select Antenna, and then press Next.
- Select your TV lineup, and then select Next.
- Enter the provider of your cable or satellite set-top box.
- If your console recognizes your brand, you'll see the message, "Your cable or satellite box has been set up." Select Next. If it does not recognize it, follow the onscreen guidance to help your console learn how to control your set-top box.
- If the process is successful, you'll now see the message, "Your cable or satellite box has been set up." Select Next.
- You can configure all of the devices in your home theater system to respond to "Xbox, on" and other voice commands by enabling your Xbox One console to control your TV when prompted.
Note Voice commands are not available in all regions. For details, see Xbox One Feature Availability.
- On the Turn on your TV when you say " Xbox on" screen, select Next to continue.
- Select your TV manufacturer from the list of common providers, and then select Next. If it's not listed, select I don't see my brand and enter it manually.
- Once your console has identified your TV, it will then try to identify the model of your TV by sending it a series of commands. When finished, you’ll see "OK, your TV is set up."
- On the Pick your start setting screen, you’ll be asked to decide which screen your console will start from when first turned on. Select one of the two options, and then select Next to continue:
- On start, go to Home. This option will display Home when you first power on your console.
- On start, go to TV. This option will display live TV when you first power on your console.
- Read the informational screens on how to navigate OneGuide to get the most from TV on Xbox One.
- If your TV provider isn't listed, it might not be compatible with OneGuide at this time. Channel lineup and specific show information are currently not available in all regions.
- For more information about finding your TV provider, see our TV Hardware Information forums.
Making changes later
It's easy to make changes to your configuration after you've set it up. Here's how:
- Press the Xbox button to open the guide.
- Select System > Settings.
- Select TV & OneGuide.
- Update the settings that you want to change.
Watch TV with OneGuide
To watch TV with OneGuide, say "Hey Cortana, watch TV," or select Live TV from the Entertainment hub.
For more information about how to use OneGuide, see Watch TV with OneGuide on your Xbox One.
Was this article helpful?
Thank you for your feedback
Thanks for your feedback!
Provide feedback for this topic
Would you like to contact Support regarding the "Set up live TV with your Xbox One X, Xbox One S, or original Xbox One console" issue you were reading about or a different issue?