How to configure audio settings on your Xbox 360 console
The Xbox 360 console supports the following analog and digital audio formats:
- Analog stereo
- Digital stereo PCM, 16-bit, 48 kilohertz (kHz)
- Dolby Digital 5.1 channel digital audio, 48 kHz
- WMA Pro
- Playback of DTS (Digital Theatre Surround) 5.1 media (such as movies) by passing the encoded DTS digital bitstream to an external DTS decoder
Connecting your Xbox 360 E console for digital audio
For digital output to a stereo or home entertainment system:
- Connect your Xbox 360 E console to your HD TV using the HDMI cable.
- Connect one end of a cable (not included) to the digital audio output port on the television. Connect the other end to the digital audio input port your stereo or home entertainment system.
Connecting your Xbox 360 S console for digital audio
You can use the following cables for digital output:
Xbox 360 VGA HD AV Cable
Xbox 360 S-Video/AV Cable
You can connect an optical audio cable with the S/PDIF (TOSLINK) port on the cable or adapter.
To connect digital audio to an Xbox 360 S console, connect the audio cable to the S/PDIF (optical audio/TOSLINK) port on the back.
Configure the console audio settings
Note The steps below might differ depending on the type of cable that you use on your console and the audio receiver or the output device that you use.
- Start the Xbox 360 console without a disc in the disc tray.
- Go to Settings and select System.
- Select Console Settings, and then select Audio.
- Select Digital Output, and then select the digital output used by your audio system:
- Digital Stereo
- Dolby Digital 5.1
- Dolby Digital with WMA Pro: This setting enables WMA Pro pass-through if your receiver supports the WMA Pro format.
Was this article helpful?
Thank you for your feedback
We're sorry this article didn't solve your problem. We won't give up and neither should you. Try this community option, below.