Troubleshoot Kinect errors for Xbox One

The Kinect sensor for Xbox One is designed to self-correct whenever possible. For example, if the sensor is having a difficult time updating its firmware, it'll attempt to solve the problem before you see an error message. In the event it can't correct itself, you'll see one of two error messages for the Kinect sensor.

Error: Kinect setup can't continue

This is a software error with the Kinect sensor. Try the following steps to correct the condition.

Note If you see this error during the console's initial setup, skip the Kinect setup portion and do the following steps after you set up the console.

  1. Make sure the Kinect sensor is connected firmly to the console's Kinect port.
  2. Power cycle your console by holding down the console's Xbox button for 10 seconds, and then rebooting the console.
  3. Go to the Kinect Settings page:
    1. Press the Xbox button to open the guide.
    2. Select System > Settings > Kinect & devices > Kinect.
  4. On the Kinect Settings page, make sure Kinect on is selected. Stay on this page for 5 minutes to make sure your console completes any available updates.
  5. If the Kinect Settings screen shows an image, the sensor is now working. If the screen is not showing an image, your Kinect needs to be repaired.

Error: There's a problem with your Kinect sensor

While using your Xbox One, you get the following error:

There's a problem

There's a problem with your Kinect sensor. Request a repair at xbox.com/xboxone/repair.

Unfortunately, this type of error indicates that the problem with the Kinect sensor can't be resolved, and the sensor must be repaired.

Your Kinect sensor turns on and off repeatedly

Try the following:

  1. Turn off the Xbox One console by pressing the Xbox button on the front of the console for 10 seconds, until it shuts down completely.
  2. Unplug the Kinect sensor from the console.
  3. Press the Xbox button on your console to turn it on.
  4. Plug the Kinect sensor into the back of the console and wait up to 2 minutes for it to be recognized.
  5. Go to the Kinect Settings page:
    1. Press the Xbox button to open the guide.
    2. Select System > Settings > Kinect & devices > Kinect.
  6. Select I moved my Kinect sensor or I'm having trouble with Kinect.
  7. Follow the instructions to adjust your Kinect sensor, including audio calibration.

If these steps didn't resolve the problem, your Kinect sensor needs to be repaired. Request a repair at Device service and repair. Console registration is required to replace the sensor.

Para ofrecerte un mejor soporte técnico, nos gustaría saber: ¿resolvió esta solución tu problema?

No

Gracias por tus comentarios

Gracias por tus comentarios

Lamentamos que no hayas podido resolver tu problema con este artículo. Seguiremos buscando una solución, no desistas. Prueba con la opción de la comunidad que te ofrecemos a continuación.
Obtener ayuda de la comunidad
Ambassador chat image
Chat con el embajador
Chatea personalmente con otro usuario de Xbox que ofrece ayuda.

Proporcionar comentarios sobre este tema

255 caracteres restantes
A fin de proteger tu privacidad, no incluyas información de contacto en tus comentarios.
Obtener ayuda de la comunidad
Ambassador chat image
Chat con el embajador
Chatea personalmente con otro usuario de Xbox que ofrece ayuda.

Póngase en contacto con nosotros

¿Quieres contactar con el Soporte técnico con referencia al problema "Troubleshoot Kinect errors for Xbox One" acerca del que estabas leyendo o con referencia a otro problema?