IPv6 on Xbox One
Xbox One can connect to networks using two protocols that allow devices to transmit information: the traditional IPv4 communications protocol, and its newer version, IPv6. For Xbox One to connect to the internet using IPv6, your home router needs to have IPv6 enabled, and your internet service provider (ISP) must support IPv6.
Internet Protocol version 6 is the most current network protocol, bringing several improvements over IPv4. Most important, IPv6 expands the number of possible IP addresses (the unique numbers that represent every device on the internet). And—most useful for Xbox—the expansion removes the need for Network Address Translation (NAT), which can interfere with multiplayer gaming and chat over IPv4 networks.
What if my Xbox One isn’t connected using IPv6?
Your Xbox will work normally without IPv6 connectivity. However, for the best possible experience, we recommend enabling IPv6 on your network. Several Xbox One features already make use of IPv6, and we’re building more.
How can I tell if my Xbox is connected using IPv6?
Here’s how to check:
- On your controller, Press the Xbox button to open the guide.
- Select System > Settings > Network.
- Select Network settings.
If your Xbox One has IPv6 connectivity, your Current Network Status will read IPv4 & IPv6. (To see your actual IP and gateway addresses, select Advanced settings.)
My Xbox is using only IPv4. What should I do to add IPv6?
Several home routers support IPv6 but disable it by default. Check the manual for your router, or visit our Networking Hardware Information support forum.
My router has IPv6 enabled, but my Xbox is connected on IPv4. What else can I do?
Try contacting your ISP to see if IPv6 is available in your area.
To provide better support, did this solution solve your problem?
Thank you for your feedback
Thanks for your feedback!
Provide feedback for this topic
Would you like to contact Support regarding the "IPv6 on Xbox One" issue you were reading about or a different issue?