More about Kinect sensor placement
Correct Kinect sensor placement will get you the best body tracking and speech recognition performance. Here are some tips:
- Avoid positioning the sensor in direct sunlight.
- Do not manually tilt the sensor, it adjusts automatically.
Position the Kinect sensor at the correct height
The sensor works best when it is positioned somewhere between 2 feet (0.6 m) and 6 feet (1.8 m) off the floor. Ideally, the sensor should be within 6 inches (15 cm) above or below your TV.
Note In smaller rooms, try to position the sensor as close to 6 feet (1.8m) as possible.
Center the Kinect sensor horizontally
Although the sensor will work if it is positioned on either side of your TV, it will work best if you center it.
Do not position the Kinect sensor near a speaker, or on a vibrating surface
Place your sensor at least 1ft (.3 m) from any speaker. At louder TV volumes, you may need to have up to 3 feet (.9 m) or more between the sensor and any speaker.
Do not place your sensor on your console, other electronic equipment, or anything that vibrates.
Position the Kinect sensor near the edge of a flat, stable surface
The sensor cannot see your feet if it is positioned too far back.
Position the Kinect sensor so it can move freely
Do not position the sensor behind cabinet doors (even glass doors) or on a narrow shelf.
Position the sensor in a place where it can tilt and automatically adjust.
If there is a piece of packing foam between the base of the sensor and the sensor head, remove the foam.
To provide better support, did this solution solve your problem?
Thank you for your feedback
Thanks for your feedback!
Provide feedback for this topic
Would you like to contact Support regarding the "More about Kinect sensor placement" issue you were reading about or a different issue?